I was watching a video of little kids trying to figure out how to use a rotary phone, and it was not immediately clear to any of them how the rotary mechanism was supposed to work. That got me thinking: why was the rotary mechanism used in phones at all? It seems like individual buttons would be more intuitive to everyone and might even have less mechanical problems than a thing that has to rotate thousands and thousands of times over it's lifetime. Why was that design choice made, why were they popular, and why did they stick around so long even after phones with buttons came on the market?

edit: The first touch tone phone was introduced by AT&T in 1963. Even though integrated circuits weren't practical for commercial use at that time, apparently transistors were:

By the early 1960s, low-cost transistors and associated circuit components made the introduction of touch-tone into home telephones possible. Extensive human factors tests determined the position of the buttons to limit errors and increase dialing speed even further. The first commercial touch-tone phones were a big hit in their preview at the 1962 Seattle World's Fair. (1)

The fact that Bell Labs had invented the transistor probably helped that process along. And I understand that the change in how telephone networks worked (from pulse dialing to DTMF) drove a change in the electrical design of phones. But while transistors let them make that protocol change, was it really impossible to implement pulse dialing using buttons but not transistors? From Wikipedia:

In the 1950s, AT&T conducted extensive studies of product engineering and efficiency and concluded that push-button dialing was preferable to rotary dialing (2).

That suggests the designers did not know that buttons were better than a dial (if they did know, why would they have done such extensive studies?). It also suggests that it WAS possible to make a phone with buttons. They would have had to build button prototypes for their studies, right?

(1) http://www.corp.att.com/attlabs/reputation/timeline/64touch.html

(2) https://en.wikipedia.org/wiki/Push-button_telephone

  • 17
    You dang kids get offa my lawn! Next you'll want to know about party lines, or why it was illegal to own your own phone! – Carl Witthoft Apr 15 '14 at 19:49
  • 14
    I bet he's never even dialed a phone number by tapping on the handset cradle, or whistled a 300 baud handshake tone. All these n00bs! – RobertB Apr 15 '14 at 21:49
  • 3
    I've protected this question because it's getting pretty much the same answer repeatedly - because the technology at the time could only handle pulse dialing. That answer has already been stated multiple times so any more ways of saying the same thing is just noise. – JonW Apr 16 '14 at 17:37
  • 6
    "early telephones"... never did a statement make me feel so old. I fully expect to see a question one day on why 'early computers' didn't have touchscreens, or understand voice commands, or have neural interfaces. – Phil H Apr 17 '14 at 8:17
  • 3
    When touch-dialling phones first came into use, they were still pulse-dialled rather than tone-dialled in most areas. In Bell Canada jurisdictions in the 1960's subscribing to touch-dialled service was extra, and subscribing to tone-dialled service was another hefty additional amount. Like long-distance service before deregulation, all the premium services were treated as a cash-cow by the Phone utilities. Also, many of the pulse-dialled exchanges had not yet been paid off as tone-dialling became capable. – Pieter Geerkens Apr 18 '14 at 12:21

12 Answers 12


The main reason was that it replaced hand crank telephones, and thus was a familiar interface.

In the hand crank phone system, several houses were connected on one line, and each house was assigned a different ring pattern. For instance you might have been assigned one short ring, then a long ring.

Your phone had a hand crank, a bell, a mouthpiece and a speaker.

When the bell rang one short ring then a long ring, you picked up the phone and answered it. You ignored other ring patterns, unless you were a nosy neighbor.

To call someone else on your circuit, you cranked the hand crank according to the pattern of the person you intended to call. The hand crank was on the side of the phone, and was essentially a small crank generator that sent an AC signal on the line, which the bells would react to on all the phones on the circuit.

If you wanted to call to someone not on your line you would ring the operator - typically one long ring - they would answer and patch your call into other circuits and other operators if need be. The final operator in the chain would put the correct ring pattern on the correct circuit for the intended recipient.

Thus, the hand crank was the original user interface for indicating who you wanted to talk to.

When automated selectors were introduced, there were many attempts to provide a reasonable user interface. One involved using two buttons, similar to telegraph keys, which had to be pulsed a number of times each to select rows and columns of relays. This was deemed too expensive because it required additional wires, and most systems instead moved to pulse dialing. This meant no new wires had to be pulled to customers, just an equipment change in the telephone plant and in the user's homes. Further, it was backwards compatible, and you could have both old crank style and new pulse style phones on the same circuit.

The first pulse dialing phones included some that had a button you would press a number of times, but individuals using the system couldn't easily time the pulses correctly. The first rotary dial phones were better, but they still depended on the user rotating the dial smoothly. Eventually a rotary dial with a spring and speed governor that created the pulses after the user let go was introduced to the market, and this is the one that took off with consumers.*

People who were used to crank dialing phones and patterns found it easy to understand and use. It was no longer a crank, and it was on the face of the phone, but it was very similar to the long and short rings of the crank phone - a 0 was the longest (10 pulses) and a 1 the shortest (1 pulse) and it was essentially a crank dial phone with more than a few pulse styles.

So while there are technical and cost reasons behind the pulse dialing technology (explained by other answers) the main reason it succeeded in the market where other techniques failed was that it was a familiar interface for those used to the prior telephone interfaces.

*Keep in mind that the phone system was a monopoly at the time, you not only paid for the line, but rented the phone as well, and were not permitted to connect your own phones to the line - only phone company owned equipment. Further, the phone company provided all the electricity needed to run the phone system. The newer pulse dial phones could have been made with buttons and electronics, rather than a mechanical system, but that made the phone more expensive, and power hungry. They could have passed the cost along to the consumer, or used the mechanical method and made more money from phone leases.

  • 7
    First answer, that really answers the question. – sweisgerber.dev Apr 17 '14 at 12:57
  • 2
    You hit upon the real answer: The rotary dial was a significant improvement over the previous user interface. – Michael Hampton Apr 19 '14 at 4:31
  • @MichaelHampton: Which came first--the rotary dial or the telephone? I haven't found any patents prior the telephone which precisely resemble a phone dial, but there were a variety of devices that used wind-up motors to generate pulse trains many decades before the telephone was invented, and something like a stock ticker (which predates the phone) might work well with something like a phone dial. – supercat Apr 19 '14 at 21:26

The reason for the design was because of the technology at the time.

Rotary Dial (Pulse dialing)

To dial a number, the user puts a finger in the corresponding finger hole and rotates the dial clockwise until it reaches the finger stop. The user then pulls out the finger, and a spring in the dial returns it to the resting position. For example, if the user dials "6" on a North American phone, electrical contacts wired through the cam mechanism inside the phone will open and close six times as the dial returns to home position, thus sending six pulses to the central office.

Push-Button (Tone dialing)

Western Electric experimented as early as 1941 with methods of using mechanically activated reeds to produce two tones for each of the ten digits and by the late 1940s such technology was field-tested. But the technology proved unreliable and it was not until long after the invention of the transistor when push-button technology matured... Over the next few decades Touch-Tone service replaced traditional pulse dialing technology and it eventually became a world-wide standard for telecommunication signaling.

  • 10
    Push-button landlines in India used to have a pulse mode too, which generates clicks via electronics. Some exchanges could only follow pulse dials. – Jesvin Jose Apr 16 '14 at 9:59
  • 7
    While highly-upvoted, this answer does not provide any insight into the choice of a dial over buttons in the user interface, which is what the question was about -- and thus does not answer the actual question asked. – Doktor J Apr 17 '14 at 4:16
  • 3
    @DoktorJ because the proper answer isn't related to the interface --- its just that rotating dial was deemed easy to manufacture and reliable in the field. Rotating dial requires less electronics to produce series of pulses, than other solutions – jb. Apr 17 '14 at 8:42
  • 2
    @jb then this should be clarified; just describing how each one works doesn't answer the question. Imagine for a moment if someone asked you "the green shirt looks better on you -- why did you wear the blue shirt today instead of the green shirt?", and you answered "the blue shirt is made of cotton, and the green shirt is made of polyester" without bothering to tell them that polyester irritates your skin. Did you really answer their question? – Doktor J Apr 17 '14 at 13:06
  • 1
    @DoktorJ Apparently you missed the part in bold. Kept the answer as short as possible (similar: who would want to read a wall of text?). Linked to Wikipedia if anyone wants to read a more detailed explanation. – Joseph Apr 17 '14 at 15:38

The most important factor is that at the time that telephones were invented, there was no such thing as automated call routing. There were people sitting in central switching stations. You told them, "Connect me to Mrs. Johnson", and they replugged the wires -- and here you go, you're now connected to Mrs Johnson. Later, automated call routing was invented, but it did not use tone dialing yet – that would have been too complicated for the simple electronics to handle, because the switching system mainly relied on relays. Instead, it used pulse dialing, which is much simpler. It can even be mechanical (read about rotary selectors).

Consider that the difference between pulse and tone dialing doesn't only exist on the end-user side, or relate solely to the user experience. You must also take into account a variety of other factors:

  • actual technology available
  • cost of the technology
  • existing infrastructure
  • availability of trained staff to maintain it.

Back then, telegraphs were in common use. Mostly, these worked mechanically. Later versions were upgraded with electronics, but that's of lesser importance. To achieve automated call routing based on pulse dialing, you could use mechanical (and later, electronic) parts that were similar to those already being used in telegraphy. These made for lower cost, quicker introduction into public service and easier maintenance.

Tone dialing, on the other hand, requires relatively good filters and detectors to match the tone frequencies. It is also more difficult to generate tones than pulses. As the electronics improved and tone dialing started to be feasible, its introduction followed, since tone dialing is generally less prone to noise and errors than merely "counting clicks".

As for the actual user interface, let's take a look at its history.

Prior to transistor-based switching, 95% of the configuration of electrical devices was achieved using:

  • switches: stable (press-stays), unstable (press-return), one-of-many (press one, reset others)
  • potentiometers (as well as similar devices: variable resistors, variable capacitors, inductors…)

So you had "on/off" devices and "knob" devices: on/off to connect or disconnect power, a 1-2-3-4-5 switch to change the channel, and a "knob" to adjust the volume or tune a circuit. There was no such thing as "press that to start a process which does A, B and then C".

And of course, there were "sliders": knobs and sliders. In other words, all the traditional potentiometers and suchlike.

Currently, we are all familiar with the notion that if you press a certain button, a machine will start, and that if you press that same button 5 times, the machine will perform its action with 5 levels of increasing intensity. So if you want a "louder sound", you press the "+" button X times. That's easy. But doing this requires a complex circuit which counts the presses, plus a DAC that converts the count to a particular voltage or capacitance etc.

Back then, if you wanted to change the intensity of something, you either:

  • pressed 1-2-3-4-5-...-X selector buttons (stable selection)
  • turned a knob left or right to get "more" or "less"
  • slid a slider up or down to produce "more" or "less".

Knobs and sliders adjusted the resistance/capacitance/inductance directly. They were simple mechanical devices.

For pulse dialing, where you need to emit more or less pulses, a rotary or sliding device is the first thing that comes to mind. Let's suppose you need to emit a given number of pulses. So we'll take a tube full of N contacts and a metal ball: if you drop the ball into the tube, it will "connect" exactly N times. Take 10 tubes, each with a different number of contacts, and you can very easily emit 1 - 10 pulses just by dropping a ball through the right tube. It's easy. It's cheap. It works. Maintenance is trivial. There are no complex or expensive circuits. But it's also harder for the end user to use. A rotary device with an automatic spring-loaded return would be so much better, and almost as cheap!

Of course, this account is merely my surmise: I don't know what the exact reasoning was at Bell Labs etc. I have simply made an educated guess based on my own knowledge of the technology.

  • 1
    In his Google talk about the future of networking among other things Van Jacobson explains the basic principles of the good old POTS. The pulses generated by the rotary dial were used for controlling relay switches capable of selecting one out of ten paths depending on the number of pulses received. The switches were daisy-chained (over distance obviously) to allow for connection branching and a larger address space. – syneticon-dj Apr 16 '14 at 7:51
  • 9
    FWIW, you could also generate the same kind of pulses by actuating the handset cradle switch with the right timing (which is obviously even more challenging than the rotary dial). I even have successfully dialed shorter local numbers in this way when I was a kid. – syneticon-dj Apr 16 '14 at 7:54
  • 1
    I think you've really covered the two important points here: not only did the rotary dial work well with the communications technology of the time, but rotary dials were a much more common UX interface for controlling machines, compared to push buttons (@PatomaS's answer has many good examples of dials versus buttons). – AmeliaBR Apr 16 '14 at 22:29
  • @ErikKowal: thank you very much! I wrote that in haste and it really reads much better after your corrections. – quetzalcoatl Apr 18 '14 at 12:19
  • 1
    I had a stereo at one point where when you pressed the plus button it ran a motor inside the device to slowly turn a potentiometer. Safe to say a mechanical implementation of +/- control is costly! – Phil Apr 21 '14 at 16:20

After watching the video, I have some doubts about the veracity of their reactions, at least for some of them, but leaving that aside, I think the main problem now is that button interfaces are very common, almost anything is now a button, so the first reaction is to press something. Phones, remote controls, interfaces on computers and tablets, microwaves, washing machines (although some still have a dial for adjusting settings selected with a button), etc.

Before this modern times, we had many different interfaces, the rotary phone, hard to press buttons or dials on blenders, dials on washing machines, little lever like controls on electrical devices, watches, etc. So we where more used to variety and rotary elements.

The rotary system is a mechanical mechanism that was available way before electronics where around and it was easy to implement with the desired precision. I could explain how that work, but the next quote from the Rotary dial article on Wikipedia summarizes it very clearly.

On the rotary dial, the digits are arranged in a circular layout so that a finger wheel may be rotated with one finger from the position of each digit to a fixed stop position, implemented by the finger stop, which is a mechanical barrier to prevent further rotation. When released at the finger stop, the wheel returns to its home position by spring action at a speed regulated by a governor device. During this return rotation, the dial interrupts the direct electrical current of the telephone line (local loop) a specific number of times for each digit and thereby generates electrical pulses which the telephone exchange decodes into each dialed digit. Each of the ten digits are encoded in sequences of up to ten pulses. For this reason, the method is sometimes called decadic dialling.

phone rotary dial

Some old rotary/dial systems washing machine controls rotary phone old air conditioning unit

Their modern counterparts

modern washing machine dashboard
(source: ukwhitegoods.co.uk)
modern home phone modern air conditioning remote controls


The reason was that the telephone system required pulses to represent the numbers, and the technology did not exist at the time to generate pulses from pushbutton presses in a simple consumer device such as a telephone.

The first automated telephone exchanges used electromechanical Strowger stepping switches that advanced one position for each pulse received.

enter image description here

The pulses from the electromechanical dial on the phone could directly control the stepping switches in the CO to connect the "in" line to the "out" line.

That was replaced gradually by electronic "touch tone" DTMF signalling, but the electronic exchanges of today still generally support pulse dialing. As recently as the 1980s I saw an operational electromechanical phone exchange in Blagoevgrad, Bulgaria (they had colorful lights wired to the steppers so it created a kinetic art effect behind the full-length windows in the central office).

  • This isn't really any different an answer to the top-voted answer. – JonW Apr 16 '14 at 14:39
  • 1
    Yeah, it is. The key thing was the technology in the exchanges, not the telephones. – Spehro Pefhany Apr 16 '14 at 14:41
  • 1
    That point has also been made in a variety of answers and comments. – JonW Apr 16 '14 at 14:44
  • @JonW I don't see the specific explanation of how a series of pulses were required to address a matrix of telephone lines via Strowger switches in any answer, just some hand-waving about technology. – Spehro Pefhany Apr 16 '14 at 14:47
  • Because this is a UX site. We don't need to know the fully detailed nitty-gritty technical explanations. From a User Experience perspective the phones were limited to pulse dialing because that's all that technology would allow at the time. Going into more technical detail, while possibly interesting, isn't a new answer to the question. It's just a technical description behind what has already been stated. – JonW Apr 16 '14 at 14:50

I don't have evidence for this, but I think it is an example of end-end system design between the selectors in the exchange, the handset and the user.

To route through one selector you need to connect and disconnect the battery a specific number of times, giving time between each 'pulse' for the selector to move into position.

So you need something that works like a music box or pianola to pace the pulses. A spring winding down against a brake was the obvious way to do this. Winding the spring with the clockwise motion and letting it unwind with the release provided motive power.

Note that we don't have any UX, here, what we have is the user as a vital mechanical part of the system.

Now the UX comes in with the design of the dial so that one inserts ones finger in a numbered hole and always moves all the way to the end stop. There is a little 'ting' when the dial reaches the rest point so one knows one can start dialling the next digit.

When I was a child, 4 digits was the most we ever had to dial. Our number was 1876. We were on the Heathrow Airport exchange which was called SKYPORT so we answered the phone "SKYPORT 1876". To dial anyone else on the exchange was 4 digits and any other call was 100 to dial the operator. I can't remember when we got Subscriber Trunk Dialling, probably around 1970.

It is a really lovely piece of integrated design, self-powered, usable in darkness, or by blind people, and immensely robust. Replicating all it's features with a touch tone system required many non-integrated features like bumps to find the home key.

Tone dialling has the great benefit that the time taken to signal each digit is the same, so dialling can be much faster. But it requires an electronic, rather than an electrical exchange.

The touch tone system is also a neat piece of engineering. Keypads lend themselves to being arranged in a matrix and if each button closes one row and one column and each row and column create a single tone one gets two tones with little complexity. simple filters or resonators at the receiving end can decode the tones.

Software systems don't constrain UI design the way mechanical and electro-mechanical systems do.

  • 2
    The concepts of using a spring-driven wheel to create patterns of interruption in an electrical circuit predates the telephone by decades. I wouldn't be surprised if some stock tickers actually use something very much like a telephone dial to allow the operator to select how many pulses to send. – supercat Apr 15 '14 at 15:08
  • 1
    I really like your UX-centered description. I agree totally with your observation about the careful UX-design present in the small details of the dial (like the little pin to stop your finger at the end of rotation/track, or the "ting") – quetzalcoatl Apr 15 '14 at 20:21
  • I don't know how many of the rotary dial's features were there from the beginning and how much was evolution. There are many other rotary designs that 'just work'. For example the echo sounder on my boat is similar to this one. i.ebayimg.com/t/seafarer-3-echo-depth-sounder-/00/s/… – Julian Apr 15 '14 at 22:11

I was going to post this a comment, but bits of it applied to each of the existing answers, so here it is in one place:

There were a few push-button pulse-dial phones around (though wikipedia could do with a reference), and even more which had a switch to select pulse/tone (in fact every non-cordless landline phone I've owned.

The real reason hinted at in previous answers is that pulse dialling can be implemented with purely mechanical systems (this is Victorian technology). You don't even need relay logic at the exchange to implement pulse dialling (though it will have been used at some point, I can't find a definitive answer for where or when).

It's not impossible to come up with a clockwork system to implement push-button pulse dialling (and steampunk enthusiasts care to try?) but this would need winding up. When the rotary phone was introduced the typewriter had only been around a couple of decades and was still new technology many people would never have seen. Even the electric doorbell hadn't taken off. A push button wouldn't necessarily have been familiar to the target market.

  • 2
    Rotary dial (pulse) was the standard for a long, long time. DTMF (TouchTone) was an extra-cost option until quite recently. Now that every major phone company has purely electronic switching, they want those expensive switches tied up for a shorter time, so the faster DTMF is cheaper for them and now the standard (no extra cost to customers). There may still one or two Dog Patch Telephone companies left in the US where pulse switching is still used (or even hand-crank machines with a live operator using patch cords!). – Phil Perry Apr 15 '14 at 17:46
  • @PhilPerry I read that about extra cost for DTMF, it took me by surprise as it was never the case here in the UK. – Chris H Apr 15 '14 at 18:23
  • In the US anyway, DTMF was extra cost to customers because ATT (and the smaller phone companies) had to install new electronic switches to handle it. Eventually just about all switches were updated anyway, as they were faster. Presumably the regulators made the phone companies stop charging extra. On your side of the puddle, they might never have allowed an extra charge for DTMF (was it a government agency?). – Phil Perry Apr 15 '14 at 18:57
  • @PhilPerry yes, at the time DTMF came in BT was a state-owned monopoly (as opposed to a privatised near-monopoly now). – Chris H Apr 16 '14 at 8:25
  • If you are sufficiently far behind the times, new technology is cheaper than going through all the old technology stages. A digital watch is a lot cheaper than a grandfather clock. Many people have cellphones now who never had a computer. – user67695 Oct 9 '17 at 14:06

The querant has asked the wrong question.

When the automatic telephone switching system was developed, electronics was mostly electromechanical -- relays and switches and capacitors, gears and springs and solenoids.

The dial mechanism wound a spring, and in returning to its resting position a set of gears and a cam repeatedly opened and closed a switch, sending a set of pulses onto the line. Those pulses were decoded by a stepping relay in the central office, which connected the phone to another stepping relay to decode the next set of pulses (and thus the next digit), until the last digit was decoded and the call was routed to the appropriate telephone line. The sequence of dial tone, answer, and eventual disconnection was likewise handled by state machines implemented in relays and RC delays.

The dial was adopted simply because it was the best solution they could find at the time for generating the set of pulses the switching system needed, at a reasonable cost per instrument, and without being unreasonably difficult to use. (It was, and I believe still is, possible to generate the pulse trains manually by rapidly pounding on the switchhook, but that's painful for the user, error prone, and bad for the equipment compared to the more reliably timed series of pulses produced by the dial.)

Having a mechanical linkage which permitted dialing by button wouldn't be impossible -- but it would be much more complicated (and expensive, and failure-prone). And it would have the major problem that pulse-dialing takes time for the pulses to go out over the line; you can't enter the next digit until the current one has finished... and the dial provided visual feedback indicating when the phone was ready for you to enter that digit; buttons wouldn't.

Touch-tone's big advantage was not the buttons, but that sending each digit takes only a moment. There's no need to make people wait while a stream of pulses goes out. As a result, you can dial more rapidly using touch-tone than you could with the pulse system. (There was in fact an intermediate stage where the central office switches were upgraded to accept pulses somewhat more rapidly than they used to, and phones with faster mechanical dial were available -- this was popular with those who wanted to shorten the delay but didn't want to pay the substantial surcharge the phone companies were asking for enabling touch-tone service.)

Modern phones, of course are entirely electronic. When operating in pulse mode, they solve the delay problem by buffering the digits as the user enters them -- so you can push the buttons as fast as you like, but the pulses will go out no faster than the official specification says they can, with the appropriate delay between digits and without digits stepping on each other. Essentially, this is the same approach that enables "type-ahead" in computers.

Of course, almost all phone hardware (except for a few museum pieces of private exchanges) has now been upgraded to accept both pulse and tone signalling from the instruments, and almost all phone companies have stopped charging extra for touch-tone service. I don't think anyone has disabled pulse signalling on land-lines yet, simply because there isn't a very good reason to stop supporting it and there are a few customers who have sentimental attachments to an old dial phone and like using it. (I still have several, including a fairly early one; I honestly don't know whether my fiber-optic phone line interface would work with them or not!)

So: The answer to "why were early phones dial rather than buttons" is, essentially, that buttons really weren't a practical option. And indeed buttons as control devices were GENERALLY rare at the time, except in the simple form of pushbutton switches. The proper question isn't "why not buttons" -- it's "when the technology switched to tones, how long and how much work did it take them to come up with buttons, and this specific arrangement and labelling of buttons?" After all, this was and is upside-down compared to the arrangement of numbers on mechanical calculators, which predated pushbutton phones... and there's no particularly good reason that the symbols * and # should have been used for the two additional buttons, or that those two buttons needed to be provided at all, or that only two buttons were added rather than enough to fill out a 4x4 grid. Those are the real UI questions that had to be considered and actively compared to the dial that people were already used to.

  • 1
    Good answer. Only thing to add is economics. The telephone was a monopoly back then, and there was no rush to make things better (or to offer it to consumers for cheap). – Aleksandr Dubinsky Apr 18 '14 at 16:39
  • @AleksandrDubinsky: Granted, but orthogonal to the discussion at hand. – keshlam Apr 18 '14 at 17:18
  • I should note that I am (barely) old enough to remember when telephone companies distributed educational films to grade schools to teach kids proper telephone operation and etiquette. (And to wish that someone would resume actively teaching the latter. Grump, grump, grump. Get off my lawn, you kids!) – keshlam Apr 18 '14 at 17:23
  • To the contrary. It is crucial to answering the OP's question, "why were they popular, and why did they stick around so long even after phones with buttons came on the market." – Aleksandr Dubinsky Apr 18 '14 at 21:06
  • We agree that we disagree, AD. – keshlam Apr 19 '14 at 3:59

In pulse-train driven "addressing" systems (to avoid the use of the word "dialing"), there is a specific timing window for recognizing a string of pulses as a specific number - there is a minimum amount of time between pulses that can be recognized by an electro-mechanical switching system, and a maximum time between pulses that signal the end of one number and the beginning of another (e.g. if you put out two pulses, then quickly put out two more pulses, is your intent to dial "22" or "4"? The only way to be sure is the presence or absence of an appropriately timed pause between those actions). The one convenient thing about the dial interface is that it forces you to wait until the pulse train for one number is complete before allowing you to enter the next number, and the amount of time it physically takes for you to start the next number (e.g. to move the dial from resting position to, say, the number '1' before releasing it) also pretty much guarantees the proper spacing between pulse trains. For simplicity of design and appropriateness for technology, it is an elegant solution.

It may seem simple to build a mechanical button-based system to generate pulses, but it begs the question - how do you keep users from pushing buttons too fast? If you can't, how do you implement "memory" (before semiconductors) so that it plays out all the numbers you punched with appropriate time between pulses and spacing between pulse trains? This is a MUCH harder problem; ask a watchmaker how difficult a complication that would be, and how feasible and costly it would be to mass-produce it.

  • For push-button dialing, one could use the approach taken by restaurant juke box remote controls systems--push a latching button, and have the machine unlatch in when ready for the next digit. That would probably be more annoying than using a dial, however. An electromechanical or wind-up type-ahead buffer would probably not be hugely difficult, but if digits will have to be outpulsed before the call can connect, I'm not sure it would be worth the complexity. – supercat Apr 17 '14 at 21:03

One factor driving the switch over to buttons rather than a rotary dial was the increasing length of telephone numbers, as they grew to accommodate more telephone numbers being used.

Having to dial lots of numbers on a rotary dial is very tedious !

As to the question of why rotary dials hung on for so long; in the UK, the switch over to being able to buy your own phone rather than using one of a few standard models rented from the state telephone service provider meant that it was suddently possible to buy push button phones that had lots of extra 'smart' features, which didn't exist on the rotary dial phones.

Rotary dial phones where also wired into the wall (rather than into a jack socket), and being low technology, rarely went wrong. So if your household already had a rotary dial phone then you tended to be stuck with it (unless you wanted to join the queue for the state telephone company to come out and change it to something more modern).


Going back to UX and quetzalcoatl's discussion above (I've not been here long enough to comment), in those days you pressed to do a binary option (on/off) and rotated to select from a range of options. Washing machines still do, but then you also selected you TV station by rotation, ditto oven temperatures, radio stations, things that pressed your name into metal at railway staions. The old telphone box shows this well, with rotating dialling action but with buttons A and B for committing contact and returning coins.

As someone else mentions, as options have increased selection by rotation becomes more complex. Imagine a TV channel selector today...

  • The first rotary phone was introduced in 1897; televisions came about roughly 30 years later. – Andrew Medico Apr 18 '14 at 22:11

In the 1890s when the automatic telephone exchange was being developed by A. B. Strowger, only pulse dialing was technologically possible. A single mechanism driven by a rotating dial was the simplest way to produce the arbitrary numbers of pulses needed.

Theoretically you could have multiple mechanisms actuated by buttons, but this would be wasteful - it would be much more expensive and occupy more space than a single dial.

The single dial also has the inherent feature of preventing/discouraging the user from sending another number until the first has finished. Buttons would not, without an additional mechanism to enforce the lockout.

protected by JonW Apr 16 '14 at 17:34

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.