Take the 2-minute tour ×
User Experience Stack Exchange is a question and answer site for user experience researchers and experts. It's 100% free, no registration required.

Isn't it true that LCD display units only have ribbon wirings on their bottom (or any one side)? So, this should leave the other sides from covering up their edges, shouldn't it? I have read somewhere that it is just a mere protection system, but if that was true, manufacturers would've easily avoided them in those multiple display walls, where bezels are the only trouble.

share|improve this question
1  
Protection seems to be a reasonable explanation. From UX point of view, another one may be encapsulation, but this is only guessing. There are, indeed, TV's with bezel minimized (like this series of Samsunt TV's: samsung.com/us/topic/ultra-slim-bezel-tvs). Personally, I don't like it very much, as image is not much isolated from the surrounding reality. –  Dominik Oslizlo Feb 20 at 7:59
    
This looks more relevant to an electrical engineering forum than UX. –  Peter Feb 20 at 14:03
    
@Peter: it depends. The answer to the question can be technical or UX related. When asking the question, you don't know that. Even if it turns out the answer is purely technical it still makes sense to keep the question here, for the simple fact of understanding that there is no UX motivation. Futhermore, even if the reason is purely technical, there most certainly is a UX related consequence. –  Bart Gijssens Feb 24 at 7:54

2 Answers 2

To answer the question, why are TV bezels there: they are there for a technical reason. It depends on the actual technology used, but in most current TV sets, the bezel contains the LED lightning electronics, which they don't want to put behind the screen, because then it would make the TV thicker. See page 10 of this document.

Manufacturers tend to make the bezels narrower, which is a good thing for the amount of space the TV requires (and it looks cool in the shop), but is a bad thing from a UX point of view. Most users find that the bezel gives a certain contrast, a border between the picture on the screen and the background. The narrower the bezels, the less contrast and not everyone enjoys that. Unfortunately, I don't have any real research information on the topic. This is purely based on what I read on forums, and reviews of TV sets.

share|improve this answer
    
and there are tvs with backlighting so the wall gets the same color as the picture blurring the line even more –  ratchet freak Feb 24 at 14:56

Hardware limitation & protection. Bezel is required as the "frame" for your TV. Heavier and fragile TV panel will require decent "frame" to hold it up and protect it from bumps and lifts (even some accidental drops).

TV manufacturer could also use a solid, strong, and slim material (which result in thinner bezel) such as alumunium or other metals to protect the panel, but those materials are expensive and will have impact to the TV price. Using plastic is the most economical solution, but how thick the plastic (how big the bezel) depend on the what inside the TV and how well it could protect it.

That is also one of the reason why most TVs with thin bezel are expensive.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.